Search your topic in Java2share
Home > Projects
eXTReMe Tracker


Error Control System In Network Environment

Abstract:

In cellular communication networks, the geographical area is divided into smaller regions, called cells. In each cell, there is one Mobile Service Station (MSS) as well as a number of Mobile Hosts (MH). The communication between MSSs is, in general, through wired links, while the links between an MH and MSS is wireless. A Mobile Host can communicate with other Mobile Hosts in the system only through the Mobile Service Station in its cell. This kind of architecture is shown in Fig. 1. There are two kinds of channels available to an MH: communication channel and control channel. The former is used to support communication between an MH and the MSS in its cell, while the latter is set aside to be used exclusively to send control messages that are generated by the channel allocation algorithm. In this paper, henceforth, unless specified otherwise, the term channel or wireless channel refers to a communication channel. When an MH wants to communicate with another MH, it sends a request message to the MSS in its own cell. The request can be granted only if a wireless channel can be allocated for communication between MSS and MH. Since channels are limited, they should be reused as much as possible. But, a channel cannot be used at the same time by two cells if they are within a threshold distance called the minimum channel reuse distance (Dmin) , because it will cause interference. Such an interference is called cochannel interference. A cell, say Ci, is said to be an interference neighbor of another cell, say Cj, if the distance between them is less than Dmin. So, if a channel r is used by a cell Ci, then none of the interference neighbors of Ci can use r concurrently. If using a channel in a cell causes no interference, then we say that this channel is available for the cell. When an MH needs a channel to support a call, it sends a request message to the MSS in its cell through a control channel. When the MSS receives such a message, it tries to assign a channel using a channel allocation algorithm. A channel allocation algorithm is usually divided into two parts: a channel acquisition algorithm and a channel selection algorithm. The task of the former is to compute the set of channels that are not being used by cells within distance Dmin. The goal of the latter is to choose a channel from the computed set of channels smartly so that good channel reuse pattern can be achieved. If the MSS cannot assign a channel to support the call initiated by the MH, then we say that the call has failed.


For Explanation/Installation of above project by our expert faculty please register here

  Name:    *
  Mobile No:    *
  E-Mail:    *
  Preferred Time:   
  Preferred Date:   

* Fields are Mandatory